PLC Control Wire Rod Breakdown Machine Antiwear Outlet 2.6-3.0mm

High Output Rod Breakdown Machine For CCA CCS Wire

Introduction

Because the drawing drum of the machine is arranged in a row, and the constant speed wheel is driven by a separate motor, the "rapid die change" can be realized when changing the production specification. As long as the speed setting switch of the constant speed wheel motor is switched to the preset position according to the specification requirements, there is no need to change a production specification like the old wire drawing machine. All eye molds must be reconfigured, that is, the eye molds above the maximum finished product specification will never change.

Due to the unique die change mode and structural characteristics of the wire drawing machine, when controlling a large specification, the high-speed drum is temporarily idling to avoid ineffective work and reduce noise. A clutch is arranged on the tenth drum shaft, and the transmission key of the drum shaft can be disengaged when necessary, so as to reduce power consumption and noise.

The device is mainly used to control the take-up speed and pull speed to synchronize with the pull tension during take-up. It is mainly composed of frame welded frame, tension storage wheel group, fixed storage wheel group, air cylinder, air cylinder regulating valve and tension feedback mechanism. In the take-up, if the take-up speed is inconsistent with the pull wire speed, the movable guide wheel group will move up and down along the guide column to drive the cam to rotate, so that the end face spacing of its linear proximity switch changes, and the take-up speed is controlled through voltage conversion to make the take-up speed and pull wire speed equal and consistent. The take-up tension can be obtained by adjusting the working air pressure of the cylinder through the manual pressure regulating valve.

Technical Parameters

Our Company

Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.

The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.

Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.

Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.

Our Workshop

FAQ

1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.

2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3 phase voltage & frequency, annealing or not, and your other requirement.

3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its certificate. They approve that we are an original manufacturer and meet their standard.

(2) We are a member of Made in China, who is always responsible for all customers.

(3) Please visit us and check our factory by video, and request necessary documents from us.

4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can also seek help from your local agency.

5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are available.

6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.

7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control complies with SGS & ISO 9001. Every machine has to past testing and trial running before it's packed for shipment.

8. Q: How can I trust you that machines pasted testing and trial running before shipping?
A: 1) We record the testing videos for you, and every necessary photos for you.
2) We welcome you to visit us and test machine by yourself in our factory.

9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas services by skillful technicians.

10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales service. Also we can help you with material purchase, worker training, etc.

11. Q: Can I visit you factory to check machines on-site? What Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For special product design, you are suggested to bring some samples, you can test it with our machines on-site.

12. Q: Can I use my own logo?
A: No problem, please inform us.