DONGGUAN WIREMAC MACHINERY EQPT. CO., LTD. andy@wiremac.com 86-0769-82706004
Product Details
Place of Origin: China
Brand Name: Wiremac
Certification: SGS, CE, UL
Model Number: ZL250A07
Payment & Shipping Terms
Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Nude Packing or Wooden Case
Delivery Time: 30 - 45 days
Payment Terms: L/C, T/T, Western Union
Supply Ability: 20 Set/Month
Inlet Wire Diameter: |
3.00 / 2.60 MM |
Outlet Wire Diameter: |
0.40 - 1.60 MM |
Drawing Dies: |
21 Dies |
Capstan Size: |
250 MM |
Line Speed: |
1800 M/MIN |
Spool Size: |
500 / 600 MM |
Equipment Size: |
L2800 X W420 X H500 CM |
Power Supply: |
410V AC, 50Hz |
Inlet Wire Diameter: |
3.00 / 2.60 MM |
Outlet Wire Diameter: |
0.40 - 1.60 MM |
Drawing Dies: |
21 Dies |
Capstan Size: |
250 MM |
Line Speed: |
1800 M/MIN |
Spool Size: |
500 / 600 MM |
Equipment Size: |
L2800 X W420 X H500 CM |
Power Supply: |
410V AC, 50Hz |
High Speed Copper Wire IM Drawing Machine With Single Take Up
Introduction
Debugging and Operation Technology of Copper Wire Drawing Machine
The quality of copper single wire production is a matter of great concern to all cable manufacturers, because the quality and efficiency of wire drawing directly affect the production process of subsequent processes, and play a pivotal role in the quality of cables. In the production of wire drawing machines The following problems often arise.
Precise control of product outer diameter deviation
Due to the uninterrupted production of copper wire drawing equipment, the speed of wire drawing will gradually become out of sync with annealing. During wire drawing, due to the fast and slow pulling speed, the wire diameter will appear intermittent and irregular. The reasons for this phenomenon are as follows:
1. The tension on the wire storage wheel is unstable, and the production workshop may use air pressure in many places, which will cause the air pressure of the air pump of the wire drawing machine to be high and small, which also makes the tension of the wire storage device unstable. The speed of the wire drawing is constant, which makes the pulling force on the wire drawing also non-constant, which can cause the deviation of the outer diameter of the single wire to be unable to be accurately controlled.
2. The jitter of the copper wire on the annealing wheel, which makes the copper wire annealed in a state of being loose and tight, and the current density of annealing is sometimes large and small, while the strength of the copper wire at higher speeds is relatively low, Therefore, it is easy to cause the copper wire to ignite on the annealing wheel, so that the surface of the copper wire is uneven in diameter due to the action of the spark.
3. The wear and tear caused by the long-term use of the gear box of the main motor can make the speed of the constant speed wheel of the drawing do not match the traction speed and the speed of the take-up, thereby forming the thinning of the monofilament.
Technical Parameters
Item | Specs | ||||||
et wire range | 2.60 mm - 3.00 mm | ||||||
Outlet wire range | 0.40 mm - 1.60 mm | ||||||
Drawing die | 21 dies | ||||||
Production speed | 1800 m/min, max | ||||||
Anneal power | 85 KVA | ||||||
Machine material | Stainless steel | ||||||
Component brand | Schneider, Yaskawa, Siemens, Habasit | ||||||
Motor of dual-reel take up |
11 KW x 2 (AC Motor) |
||||||
Equipment size | L28 × W4.5 × H5.0 M | ||||||
Equipment weight | 9000 kgs |
Note: For more details, please contact us. Thank you.
Details Picture
Download Center
Manual of Machine Purchase
Packing, Shipping, Quality & Service, FAQ etc.pdf
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3 phase voltage & frequency, annealing or not, and your other requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its certificate. They approve that we are an original manufacturer and meet their standard.
(2) We are a member of Made in China, who is always responsible for all customers.
(3) Please visit us and check our factory by video, and request necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control complies with SGS & ISO 9001. Every machine has to past testing and trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial running before shipping?
A: 1) We record the testing videos for you, and every necessary photos for you.
2) We welcome you to visit us and test machine by yourself in our factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales service. Also we can help you with material purchase, worker training, etc.
11. Q: Can I visit you factory to check machines on-site? What Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For special product design, you are suggested to bring some samples, you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.